Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the battery from the Mini Countryman

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Battery

In this video we see how to remove the battery of the Mini Countryman: the battery is located on the left side of the engine compartment (looking at the car from the front) just below the windshield wiper. In the part closest to the body, we find a 10mm bolt that we must open to access the battery compartment, and another higher up, to be able to remove the cover and remove it. We must be careful, when removing this cover, of the windshield that is right above it, and therefore we must be very careful and pull it horizontally towards us, as the youtuber shows us. Disconnect the negative connector, then the positive one and then remove the fixing bolt located at the bottom of the compartment. The battery should also be pulled towards us with great care.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of the 2016 Mini Countryman
How to remove the door panel of the 2016 Mini Countryman
Mini (2010-2016 / R60, Countryman1) In this video we can see how to remove the inner door panel of the 2015 Mini Countryman: it is a fairly simple thing, the first step to remove the pa…
How to replace the battery in the Mini Countryman?
How to replace the battery in the Mini Countryman?
Mini (2010-2016 / R60, Countryman1) Replacing the battery in the Mini Countryman, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure the…
How to replace the battery of the Mini Countryman
How to replace the battery of the Mini Countryman
Mini (2017-2023 / F60, Countryman2) The steps illustrated in this guide will show us the process of disassembling and replacing the battery of the Mini Countryman. First, we open the ho…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos