Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset service on a Mini Cooper

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Warning light – error code

In this very short tutorial, we will see how to reset the service light on a Mini Cooper. Let's start by turning on the car's instrument panel without starting the engine, then press and hold the right button on the speedometer for about five seconds to enter the reset menu. After that, select the engine oil light and hold down the left lever button on the steering wheel for a few seconds until the reset request appears, then release the lever button and press it again to confirm.

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Mini Cooper?
How to reset the service in the Mini Cooper?
Mini (2014-2023 / F55, F56, F57, F54) Resetting the service in the Mini Cooper, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, make sure you…
How to reset the tire pressure light in the Mini Cooper?
How to reset the tire pressure light in the Mini Cooper?
Mini (2014-2023 / F55, F56, F57, F54) In this tutorial, we can see how to reset the service in the Mini Cooper, an extremely simple and quick operation, to be carried out only once the co…
How to reset the service light on the Mini Cooper?
How to reset the service light on the Mini Cooper?
Mini (2014-2023 / F55, F56, F57, F54) In this tutorial we can see how to reset the service in the Mini Cooper, an extremely simple and quick operation, to be carried out only after comple…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos