|
Do it yourself
| |||
| ||||
How to change the engine oil and oil filter on Nissan Cabstar
Model: Nissan Cabstar
MK 3
- Years 2007-2013
In today's video tutorial we will see the main steps to allow us to carry out the routine maintenance service, replacing the engine oil and the oil filter, on the Nissan Cabstar, in simple steps. First of all we lift the car and start by removing the oil vent bolt that we find on the oil pan, letting it drain in a container for about ten minutes. At this point we open the engine hood and unscrew the oil filter (which we find at the bottom next to the oil dipstick) with the appropriate key; let's replace it with the new one and pour the new oil!
Posted on 15 October 2021 by ScegliAuto
This video is currently unavailable
Related tutorials
Nissan Cabstar
(2007-2013 /
MK 3)
In this tutorial we can see how to reset the oil service in the Nissan Cabstar van, an extremely simple and fast operation. Before doing so, we will …
Nissan Cabstar
(2007-2013 /
MK 3)
A common issue with the Nissan Cabstar and Atelon is that the kilometers on the display suddenly disappear and only the word "oil" appears. Another c…
Nissan Cabstar
(2007-2013 /
MK 3)
In the Nissan Cabstar, just like in the Nissan Pathfinder, as mentioned in the video guide available here, there are common resets, for example, here…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.120
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
