Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Passenger Airbag on the Nissan X Trail

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Airbag

See other generations:
Video tutorial

To disable the passenger airbag on the Nissan X Trail model 3, open the passenger door and the glove compartment on the right side, so you can insert the car key into the airbag lock and set it to OFF. Then, turn on the instrument cluster to verify that the airbag has been disabled.

To reactivate it, follow the same steps but move the toggle to ON. Remember to reactivate the safety device once you have finished transporting goods or children in a baby seat, as this device can make a difference in the event of an accident.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Light in a Nissan X-Trail?
How to Reset the Airbag Light in a Nissan X-Trail?
Nissan X Trail (2007-2014 / MK 2, T31) To reset the airbag light in the Nissan X-Trail, enter the cabin and turn on the instrument panel. This should remain on until the airbag light start…
Where is the fuse box located in the Nissan X Trail 1?
Where is the fuse box located in the Nissan X Trail 1?
Nissan X Trail (2001-2006 / MK 1, T30) The Nissan X Trail model 1 has two fuse boxes. The first fuse box is located under the bonnet, specifically near the battery. Inside, you will find t…
How to Disable Start & Stop on the Nissan X-Trail T32
How to Disable Start & Stop on the Nissan X-Trail T32
Nissan X Trail (2014-2023 / MK 3, T32) This brief video tutorial explains how to disable the Start & Stop feature on the Nissan X-Trail T32. You will need: a small tie and a pair of fine-n…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos