Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Opel Movano

Model: Vauxhall Movano MK 2, Movano B - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:
Video tutorial

Today we will explain how to replace the engine oil and oil filter on an Opel Movano vehicle. Place a container under the oil pan so that once the nut is removed, the oil can drain into the container.

The oil must then be disposed of according to the instructions of your municipality. When the oil has stopped draining, close the oil pan nut, remove the container, and proceed with replacing the oil filter.

Using a torque wrench, unscrew the nut on the cover of the oil filter box and remove the box from its housing. Remove the old filter and insert the new filter, close the cover, and mount the box by screwing in the nut. Open the front hood, unscrew the oil tank cap, and pour 4 liters of engine oil into the tank.

Screw the cap back on and close the front hood.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

How to top up the oil in the tank on a 2010 Opel Movano
How to top up the oil in the tank on a 2010 Opel Movano
Vauxhall Movano (2010-2021 / MK 2, Movano B) Today, we will explain how to top up the engine oil in the oil tank of a 2010 Opel Movano. To carry out this procedure, park the vehicle on a flat ar…
When is Engine Oil Change Necessary on Opel Movano?
When is Engine Oil Change Necessary on Opel Movano?
Vauxhall Movano (2021-2026 / MK 3) Learn how to check the oil change interval on the Opel Movano MK3: this vehicle's system autonomously calculates the maintenance interval based on dr…
How to Reset the Service Light on a 2015 Opel Movano
How to Reset the Service Light on a 2015 Opel Movano
Vauxhall Movano (2010-2021 / MK 2, Movano B) The Opel Movano is the goods transport vehicle shown in the attached tutorial video, where the engine oil has been changed along with the oil and air…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos