Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on the Opel Corsa 1.2

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

In this guide, we will see the main instructions on how to remove and replace the water pump on the Opel Corsa 1.2. First, open the engine bonnet of the vehicle and start by disconnecting and removing the air intake hose and the engine support; loosen the tensioner to remove the V-belt, as shown in the video.

At this point, unscrew the screws of the water pump cover located near the timing cover to remove it; replace it with the new one, reassembling all the other components and topping up with coolant.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) To replace the water pump on an Opel Corsa, access the left side of the engine bay to reach the timing belt housing. Here, you will locate the water …
Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…
Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos