Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on an Opel Astra

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Oil filter

See other generations:
Video tutorial

How to replace the engine oil filter on an Opel Astra? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket spanner, unscrew the large securing bolt of the oil filter housing.

Remove the worn oil filter and install a new one (after draining the fluid). Lift the car on a jack and unscrew the bolt of the oil sump; allow the fluid to drain into a container.

Finally, top up with new fluid and close the front bonnet.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to replace the engine oil filter of the Opel Astra?
How to replace the engine oil filter of the Opel Astra?
Vauxhall Astra (2004-2010 / Astra H) Replacing the oil filter and engine oil on the Opel Astra model H is a simple and quick operation to perform independently. First, open the bonnet an…
How to Replace the Front Headlight Bulb on an Opel Astra G
How to Replace the Front Headlight Bulb on an Opel Astra G
Vauxhall Astra (1998-2006 / Astra G) In this guide for Opel Astra G owners, you will discover the steps to replace the front headlight bulb. First, park your Opel Astra G on a flat surfa…
Where to find and how to access the control unit of an Opel Astra?
Where to find and how to access the control unit of an Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) Good morning, today's guide aims to find the position and access the control unit of your Opel Astra. Start by opening the front passenger door. Next…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos