|
Do it yourself
| |||
| ||||
How to Remove the Alternator Belt from the Opel Astra H 1.6
Model: Vauxhall Astra
Astra H
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
To remove the alternator belt, you will need: a 19 mm spanner, a T25 Torx bit, a ratchet, and a clip removal tool. It is advisable to perform this operation with the car raised. Remove the front passenger side wheel. Using a T25 Torx bit, unscrew the 3 screws and remove the clip holding the wheel arch liner (passenger side) so you can start observing the belt. Use a 19 mm spanner to loosen the tension on the tensioner by turning the spanner slightly counter-clockwise. This way, by moving the tensioner slightly, you can begin to remove the belt and subsequently reposition the tensioner. BELT MOUNTING DIAGRAM: The belt should pass to the right of the tensioner, to the left on the upper gear (top left of the tensioner), to the right on the upper gear (top right of the tensioner), to the right on the lower gear (bottom right of the tensioner), and to the left on the lower gear (bottom left of the tensioner). At this point, you can reattach the wheel arch liner by screwing in the 3 screws and inserting the previously removed clip, then refit the wheel. Finally, run the engine at idle for a few minutes.
Updated on 2 June 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(2009-2016 /
Astra J)
How to remove the alternator from an Opel Astra? Let's see how to disassemble it from inside the engine bay. Open and lift the front bonnet, remove t…
Vauxhall Astra
(2009-2016 /
Astra J)
Remove the alternator from an Opel Astra? Start by accessing the alternator from the engine bay. Pull the lever located at the bottom left of the das…
Vauxhall Astra
(2004-2010 /
Astra H)
Replacing the alternator belt on an Opel Astra is a very simple and quick task. You will need a 19 mm spanner, a Torx T25 screwdriver, and possibly a…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |