Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light Bulbs on the Opel Astra?

Model: Vauxhall Astra Astra K - Years 2015-2022
Part: License plate light

Replacing the number plate light bulbs on the Opel Astra, as shown in this tutorial, is a very simple and quick operation. First, ensure the key is not in the ignition for safety. Then, open the boot and use a flathead screwdriver to pry out the first bulb holder. Next, remove the bulb by turning it counterclockwise, disconnect the power connector, and attach the replacement. Finally, reassemble everything and repeat the process for the opposite light if necessary.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Lights on the Opel Astra
Replacing the Number Plate Lights on the Opel Astra
Vauxhall Astra (2015-2022 / Astra K) Today’s guide will show you the procedure for removing and replacing the number plate lights on the Opel Astra. First, move to the rear of the vehicl…
How to Replace the Number Plate Bulb on the Opel Astra
How to Replace the Number Plate Bulb on the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) To replace the number plate bulb on the Opel Astra, use a tool to lever out the light unit from its housing above the number plate. Once the light un…
How do you replace the license plate light bulb of the Opel Astra?
How do you replace the license plate light bulb of the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) In order to replace the license plate light bulb of the Opel Astra, you need to use an object to pry and detach the small light fixture above the lic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos