Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wishbone on a Peugeot Ranch

Model: Peugeot Ranch MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Control arm

Video tutorial

First, place the vehicle on a column lift and loosen the wheel nuts with a telescopic spanner. Then, lift the car to your preferred height and remove the wheel.

Now, work underneath the vehicle. Use a socket to unscrew the wishbone's securing bolt and the bolt mounted under the wheel hub. Unscrew the upper wishbone bolts as shown in the video and the plate secured to the car's body.

Use a pry bar to slide the wishbone off its bolts, unscrew the last bolt, and tap the wishbone with a hammer to remove it. Now that the wishbone is removed, obtain a new one, compare it with the old one, and if it fits, begin the installation.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wishbone of a Peugeot Ranch
How to Remove the Front Wishbone of a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) Learn how to remove the front wishbone of a Peugeot Partner. First, place the vehicle on a column lift and loosen the wheel nuts with a socket spanne…
How to Remove the Starter Motor from a Peugeot Ranch
How to Remove the Starter Motor from a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) Open the engine bay, disconnect the battery terminals, and remove the battery. Disconnect the starter motor cables using pliers or a screwdriver, dep…
How to Remove the EGR Valve from a Peugeot Ranch
How to Remove the EGR Valve from a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) If you notice engine performance issues and an increase in exhaust smoke, the EGR valve may be clogged, causing it to remain slightly open and allowi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos