Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from a Peugeot Ranch

Model: Peugeot Ranch MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: EGR valve

Video tutorial

If you notice engine performance issues and an increase in exhaust smoke, the EGR valve may be clogged, causing it to remain slightly open and allowing exhaust gases to enter the intake; you need to remove and clean it thoroughly: first, allow the engine to cool; the valve is located at the rear right of the engine when viewed from the front; to locate it easily, follow the metal pipe from the centre of the intake manifold to the valve; after removing the valve, it is advisable to also remove and clean the corresponding heat exchanger.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the Starter Motor from a Peugeot Ranch
How to Remove the Starter Motor from a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) Open the engine bay, disconnect the battery terminals, and remove the battery. Disconnect the starter motor cables using pliers or a screwdriver, dep…
How to Replace the Front Wishbone on a Peugeot Ranch
How to Replace the Front Wishbone on a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) First, place the vehicle on a column lift and loosen the wheel nuts with a telescopic spanner. Then, lift the car to your preferred height and remove…
How to Remove the Front Wishbone of a Peugeot Ranch
How to Remove the Front Wishbone of a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) Learn how to remove the front wishbone of a Peugeot Partner. First, place the vehicle on a column lift and loosen the wheel nuts with a socket spanne…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos