Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Ranch
    4. : How to remove the front swing arm of a Peugeot Ranch

Peugeot Ranch - Video tutorial

Model: Peugeot Ranch MK 1 - Years 1996-2008
Part: Arm
Operation: How to remove the front swing arm of a Peugeot Ranch

Let's see how to remove the front swing arm of a Peugeot Partner. First we put the car on a column bridge and loosen the wheel pins with a telescopic wrench, then, we lift the car to a preferred height and take off the rim. With a socket wrench we unscrew the locking pin of the swinging arm and the pin mounted under the wheel hub, we unscrew the pins of the upper part of the arm as shown in the video and the plate tightened on the sheet of the car. Remove the arm from the pin seat with the help of a crowbar, unscrew the last bolt and hit the arm with a hammer to pull it away. Now that the arm is disassembled, let's get a new one, compare it with the old one and if, okay, let's start the assembly. We put the arm under the car and begin to tighten all the bolts on the threads shown in the video. We finish assembling all the previously disassembled pieces.


Posted on 31 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos