Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Peugeot Ranch

Model: Peugeot Ranch MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine

Video tutorial

Open the engine bay, disconnect the battery terminals, and remove the battery. Disconnect the starter motor cables using pliers or a screwdriver, depending on the pressure of the tabs.

Use a socket spanner to unscrew the securing bolts of the starter motor and remove it from the engine bay. Finally, fit the new starter motor, reconnect the power cables, and secure with the associated bolts. Prepare to refit the engine to the vehicle along with all its components.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Peugeot Ranch
How to Remove the EGR Valve from a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) If you notice engine performance issues and an increase in exhaust smoke, the EGR valve may be clogged, causing it to remain slightly open and allowi…
How to Replace the Front Wishbone on a Peugeot Ranch
How to Replace the Front Wishbone on a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) First, place the vehicle on a column lift and loosen the wheel nuts with a telescopic spanner. Then, lift the car to your preferred height and remove…
How to Fit Roof Bars on a Peugeot Ranch
How to Fit Roof Bars on a Peugeot Ranch
Peugeot Ranch (1996-2008 / MK 1) Start by opening the designated slots on the roof that will accommodate the bases for the bars. Once these slots are opened, cut 4 centimetres of pla…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos