Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix Error P1505 on a 2018 Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Warning light – error code

Let's see how to fix error P1505 on a 2018 Peugeot Boxer: the symptom is that the engine does not start and does not turn over; often, the hazard lights remain on. The ECU gives the error P1505, which is a generic error with the immobiliser or security system. The cause is not a mechanical fault but the accidental activation of an emergency button hidden under the driver's side dashboard. You need to look down towards the pedals where you will find a small button (black or red) often unmarked. Simply press that button, and the emergency mode will deactivate, restoring normal operation of the starting system. At that point, you just need to clear the error code P1505 with a diagnostic tool. That button is a security anti-theft device that may have been accidentally pressed during cleaning, while organising items under the seat, or for any other reason.

Posted on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Radio on the Peugeot Boxer?
Peugeot Boxer (2006-2024 / MK 2) If the radio on your Peugeot Boxer becomes unresponsive due to a software issue rather than a technical problem requiring a service centre, attempt a…
How to Reset the Oil Warning Light on the Peugeot Boxer
How to Reset the Oil Warning Light on the Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) To manually reset the oil warning light on the dashboard of your second series Peugeot Boxer, you do not need to visit a local garage. You can comple…
Peugeot Boxer: How to Reset the Fuel Pump Safety Switch
Peugeot Boxer: How to Reset the Fuel Pump Safety Switch
Peugeot Boxer (2006-2024 / MK 2) When the Peugeot Boxer experiences a strong impact or vibration, it may trigger the fuel supply safety cut-off, preventing the engine from starting. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos