Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs on Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Glow plugs

See other generations:
Video tutorial

Let’s look at replacing the glow plugs on a Peugeot Partner. Lift the front bonnet and secure it, remove the engine cover panel, and begin unscrewing the coil from above the glow plug.

Unscrew the screws and detach the coil, then use your socket wrench to unscrew the glow plugs once the coil is removed. Take the new glow plug and guide it with the extension of the socket wrench into the cylinder head: tighten the glow plug until it is fully threaded.

After installing all the glow plugs, simply reattach the various engine covers. Start the vehicle and check its operation.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to replace the glow plugs in a Peugeot Partner van?
How to replace the glow plugs in a Peugeot Partner van?
Peugeot Partner Tepee (1996-2013 / MK 1) In this tutorial, we can see how to replace the glow plugs in the Peugeot Partner van, an operation that is extremely simple and quick. First of all,…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos