Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the ABS Pump

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake system

Video tutorial

The braking system of the car is one of the most important components for your safety and that of others, so it must be closely monitored. To remove the ABS pump from this vehicle, use the appropriate tool to unscrew the nuts that secure the brake circuit pipes to the pump.

Once the brake pipe nuts are removed, unscrew the bolts at the ends of the captive screw that secures the pump to the support bracket. At this point, disconnect the connector by unlocking the catch with a screwdriver.

Once this constraint is removed and the pipes are completely taken off, you can extract the pump body.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Removal of Fuel Pump and Float
Removal of Fuel Pump and Float
Peugeot 406 (1995-2005 / MK 1) This video shows how to remove the fuel pump. First, remove the rear seats as they are located directly above the tank with the pump. The seats are e…
Guide to Removing the High-Pressure Fuel Pump of the Peugeot 406 2.2 HDI
Guide to Removing the High-Pressure Fuel Pump of the Peugeot 406 2.2 HDI
Peugeot 406 (1995-2005 / MK 1) Below are the main instructions for removing and replacing the high-pressure fuel pump of the Peugeot 406 2.2 HDI. First, open the engine bonnet of t…
How to Remove and Replace the Fuel Pump on the Peugeot 406
How to Remove and Replace the Fuel Pump on the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) In this video tutorial, you will learn how to remove and replace the fuel pump or float pump on the Peugeot 406 first series, following these simple …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos