Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery on a Peugeot 208 1.2 Puretech

Model: Peugeot 208 A9, MK 1 - Years 2012-2019
Part: Battery

Today, we will see how to disassemble and replace, in simple and quick steps, the battery on the first series Peugeot 208 with a 1.2 Puretech petrol engine. First, open the bonnet of your car and start by disconnecting the terminals (positive and negative) of the battery, located on the right side of the engine bay; then remove the side control unit along with the wiring, and unclip the two plastic tabs at the bottom, as shown in the video. Lift and extract the battery upwards, replacing it with the new one (with the same amperage); now reassemble everything!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / A9, MK 1) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How to Reset the Service Light in a Peugeot 208 1.2 Puretech?
How to Reset the Service Light in a Peugeot 208 1.2 Puretech?
Peugeot 208 (2012-2019 / A9, MK 1) The operation referred to the Peugeot 208 1.2 Puretech is quite simple to perform DIY, accessible to anyone. When servicing the vehicle, you must fir…
How to replace the auxiliary belt on a Peugeot 208 1.2 Puretech?
How to replace the auxiliary belt on a Peugeot 208 1.2 Puretech?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, we will see how to replace the auxiliary belt on a Peugeot 208 1.2 Puretech, a very simple and quick operation but that requires go…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos