Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Rocker Cover Gasket on Peugeot 207

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

Video tutorial

We will look at the dismantling of the rocker cover on a Peugeot 207. Lift the front bonnet and secure it, then begin removing the engine soundproofing panel (including the air filter on the model). Once the engine cover is removed, take out the coils and then the spark plugs.

Unscrew the securing screws of the rocker cover: unscrew the screws around the cover and remove them. Lift the cover off the cylinder head.

Fit a new cover or replace the gasket, etc. Reassemble all cover pieces at the end of the maintenance, securing the spark plugs and coils.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

Peugeot 207 (2006-2015 / MK 1) Replacing the thermostat in your Peugeot 207 is a slightly complex task, but you can easily do it at home with some manual skills. The first step is …
Peugeot 207 (2006-2015 / MK 1) Before you can start, open the tailgate of your Peugeot 207. Begin by moving the side carpet in the boot. Next, unscrew and remove the internal screw…
Peugeot 207 (2006-2015 / MK 1) In this tutorial video, you will learn how to remove and replace the diesel filter on a Peugeot 207. First, open the bonnet and locate the diesel fil…

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos