Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Gasket on a Peugeot 207 1.4

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Cylinder head

Today's main steps will show you how to remove and replace the cylinder head gasket on a Peugeot 207 1.4. First, open the bonnet and start by removing the engine mount; then lift the vehicle and remove the front right wheel and the wheel arch liner, as shown in the video. At this point, remove the V-belt and the crankshaft pulley, taking off the timing cover and then the belt; unscrew the bolts of the cylinder head cover and then the cylinder head, removing and replacing the gasket with the new one, following the video tutorial to the end!

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Spark Plugs on Peugeot 207
How to Replace Spark Plugs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Remove the spark plugs on a Peugeot 207. Open the engine bay and lift the front bonnet, securing it in place. Disconnect the battery terminals. Remov…
Replacing Spark Plugs on Peugeot 207 1.6
Replacing Spark Plugs on Peugeot 207 1.6
Peugeot 207 (2006-2015 / MK 1) Lift the bonnet to access the Peugeot engine. Unscrew the securing bolts of the engine cover with a socket wrench, grasp it with your hands, and remo…
How to Replace Rocker Cover Gasket on Peugeot 207
How to Replace Rocker Cover Gasket on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) We will look at the dismantling of the rocker cover on a Peugeot 207. Lift the front bonnet and secure it, then begin removing the engine soundproofi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos