Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How does the Peugeot 2008 cruise control work?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 2 - Years 2019-2024
Part: Checks and maintenance
Operation: How does the Peugeot 2008 cruise control work?

To be able to set the cruise control of the Peugeot 2008, use the lever located to the left of the steering wheel: on this lever there will be a small wheel, which must be turned downwards once the desired cruising speed is reached. In this way the car will proceed without the need to hold down the accelerator; therefore, using the buttons on the rear part of the lever it will be possible to increase or decrease the speed by one km/h. By pressing the brake pedal, the cruising speed will be reduced and it will be possible to deactivate the cruise control by lifting the small wheel on the lever.


Posted on 15 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - What does the engine warning light on the Peugeot 2008 indicate? Read Answer
    • Peugeot 2008 2019-2026 - How often does the Peugeot 2008 need to be serviced? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the "AdBlue consumption anomaly" light comes on in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why is the Start&Stop of Peugeot 2008 not working anymore? Read Answer
    • Peugeot 2008 2013-2019 - How often should the Peugeot 2008 be serviced? Read Answer
    • Peugeot 2008 2013-2019 - Where is the AdBlue tank located on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - How do you reset the service light on a Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why doesn't the rearview mirror of the Peugeot 2008 open anymore? Read Answer
    • Peugeot 2008 2013-2019 - Where is the OBD port located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - How much does a Peugeot 2008 service cost? Read Answer
    • Peugeot 2008 2013-2019 - What is the problem with the rear window seal of the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What are the yellow warning lights of the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why does the AdBlue emission error appear in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Why did the AdBlue light turn on in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Anti-pollution warning light on in Peugeot 2008, what does it mean? Read Answer
    • Peugeot 2008 2019-2026 - How much does the original Peugeot 2008 armrest cost? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't the Peugeot 2008 display work? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't the Peugeot 2008 turn on? Read Answer
    • Peugeot 2008 2013-2019 - Why does the Peugeot 2008 display no longer work? Read Answer
    • Peugeot 2008 2019-2026 - Every how many km should the Peugeot 2008 be serviced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos