Do it yourself
Frequently asked questions about cars and motorcycles

Check-Up of Your Car

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

It is important to always carry out good maintenance on your car to keep costs as low as possible. Certainly, a vehicle with many miles requires more frequent and consistent maintenance compared to one with fewer miles or a zero-mileage vehicle.

All maintenance work should be done with the engine cold and the car on level ground to ensure maximum safety. Check the coolant level approximately every 200 miles; it is advisable to keep it at the maximum level.

This operation must be performed with the engine completely cold, by unscrewing the cap of the reservoir. Maintenance must also include changing the oil, oil filter, and air filter.

All crucial aspects for the proper functioning of your car.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Peugeot 206 (1998-2012 / MK 1) This guide shows how to correctly change the oil filter of your car. To carry out this replacement, lift your car off the ground with a jack. The eng…
Peugeot 206 (1998-2012 / MK 1) The following guide shows how to correctly replace your car radio. Start by removing the old radio; to do this, follow the instructions in your car's…
Peugeot 206 (1998-2012 / MK 1) .. engine oil is not a difficult procedure. First, check the owner's manual to determine the type of oil required, so you can purchase the correct one... …

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos