Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Timing belt replacement

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Timing belt
Operation: Timing belt replacement

Replacing the timing belt requires good mechanical knowledge as an error in this maintenance could seriously damage the engine; in addition to the belt, it is always advisable to replace the tensioner and the water pump; then remove the plastic cover under the engine and drain the coolant from the drain plug under the radiator; remove the cover on the engine, remove the drain plugs from the refrigeration system and disconnect the battery; lift the car on a stand on the distribution side and remove the front wheel; then remove the auxiliary belt by loosening the relative tensioner, disassemble the crankshaft pulley and the timing belt protection casings; then align the timing references by rotating the crankshaft and fix this position with the appropriate templates; apply a support under the engine to be able to remove the side support and complete the disassembly of the timing system and the water pump; install the new pump, the new tensioner and therefore the belt itself, removing the timing templates only at the end; proceed in reverse order to reassemble and fill the refrigeration system with anti-freeze liquid and bleed it.


Posted on 21 August 2023 by ScegliAuto



Distribution replacement of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) We remove the timing belt of the Peugeot 206 if it needs to be changed. Changing the timing belt is very important in order not to damage the engine.
How do you replace the timing belt of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The replacement of the timing belt on the Peugeot 206 is done by loosening the bolts that secure the right front wheel, so that the fastening rivets
How do you replace the timing belt on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the timing belt on the Peugeot 206, you need to go and open the bonnet, locating the belt on the left side of the engine block: h

Other guides that may interest you

    Frequently Asked Questions

    • 206 1998-2012 - At how many km to change the timing belt in the Peugeot 206? Read Answer
    • 206 1998-2012 - How much does the timing belt cost on a Peugeot 206 1.4 hdi? Read Answer
    • 206 1998-2012 - How much does the Peugeot 206 14 HDi distribution kit cost? Read Answer
    • 206 1998-2012 - How much does it cost to replace the timing belt on the Peugeot 206 1.4 hdi? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos