Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Suspension Link

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Control arm

This video is currently unavailable

If the rear suspension link fails, the wheel will tend to have play that could eventually damage the hub bearing. To confirm this, lift the vehicle on a suitable car stand and move the wheel perpendicular to the direction of travel.

Before proceeding with disassembly, mark the position of the head of the fixing pin of the link's eye as it is an eccentric pin that affects the camber of the wheel. Then, remove the fixing pin of the link and the one connecting to the wheel hub, take out the old link, and install the new one using a new fixing pin, ensuring to orient the head as previously marked.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Replacing the Stabiliser Link
Peugeot 406 (1995-2005 / MK 1) To replace the link connecting the stabiliser bar to the rear suspension arm, lift the vehicle and position it on a jack stand, remove the rear wheel…
Replacement of Suspension Wishbone Ball Joint
Peugeot 406 (1995-2005 / MK 1) To carry out this repair, first gather the necessary tools, namely a fork puller to detach the wishbone eye from the ball joint and a socket spanner …
Replacing the Shock Absorber Support Bearing
Peugeot 406 (1995-2005 / MK 1) Lift the vehicle on suitable axle stands and remove the front wheel. Remove any oxidation residues with a wire brush and spray penetrating fluid on t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos