Do it yourself
Frequently asked questions about cars and motorcycles

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Battery
Operation:

The procedure for replacing the battery on the Peugeot Partner is carried out by opening the hood, so that access to the battery located on the right side of the engine compartment, halfway up, is obtained. Once the device has been located, it will be possible to disconnect the respective power cables and loosen the screws that hold it to its support. In this way, the old battery can be removed from its housing and replaced with a new spare part; after the battery has been inserted, the cables must be reconnected and it must be secured with screws, finally closing the hood.


Posted on 16 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How do you replace the Peugeot Partner Tepee's supply battery? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos