Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to remove the front bumper on the Peugeot 308?

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Front bumper
Operation: How to remove the front bumper on the Peugeot 308?

In this tutorial, we can see how to remove the front bumper on the Peugeot 308, an extremely simple and fast operation. First, we open the engine hood, then we unscrew both the screws located on the top of the grille and those located inside both wheel arches. We continue by unscrewing the lower bolts, then we grab the bumper from one of the two ends and, pulling it outward, separate it from the frame. At this point, all that's left is to disconnect the power connectors of the fog lights and follow the reverse procedure to install the replacement if necessary.


Posted on 8 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 308 2013-2021 - How to disassemble the bumper in the Peugeot 308 t9? Read Answer
    • 308 2007-2014 - How much is the front bumper of the Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos