Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. Boxer
  6. : How to reset the oil light in the Peugeot Boxer?

Peugeot Boxer - Video tutorial

Model: Peugeot Boxer MK 2 - Years 2006-2023
Part: Checks and maintenance
Operation: How to reset the oil light in the Peugeot Boxer?

Let's sit on the driver's side and turn on the dashboard, making sure the engine remains off in this first phase. Let's locate the pedals we need for this operation: the brake pedal and the accelerator pedal. These need to be pressed simultaneously and held down for the entire duration of the procedure. Immediately after pressing them, we then turn the key to start the engine and wait for about 20 seconds. When the oil light starts flashing, we can release the pedals and turn off both the engine and the dashboard.


Posted on 9 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Boxer 2006-2023 - How to reset the service light on a Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What are the warning lights of the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How do you turn off the service light on the Peugeot Boxer 3? Read Answer
    • Boxer 2006-2023 - How do you reset the Peugeot Boxer Service light? Read Answer
    • Boxer 2006-2023 - What to do if the Peugeot Boxer oil light flashes? Read Answer
    • Boxer 2006-2023 - How do you clear the brake warning light on the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to reset the service in the Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - How to do a service reset in the 2019 Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - What warning lights are there in the dashboard of the Peugeot Boxer van? Read Answer
    • Boxer 2006-2023 - How to replace the H7 bulb of a Peugeot Boxer? Read Answer
    • Boxer 2006-2023 - AdBlue warning light on in the Peugeot Boxer, what to do? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos