Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on a Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Diesel fuel filter

Video tutorial

To change the fuel filter on a Peugeot Rifter, place the vehicle on a lift and raise it to work underneath the floor. Near the rear right wheel, you will find the filter body; position a container underneath to catch any fuel spills.

Unscrew the drain plug, using a 19mm Allen key to unscrew the filter body and place it on a workbench. Replace the O-ring on the filter connection, remove the filter element, clean the interior, and install a new filter with a new seal.

Refit the filter, reversing the previous steps, lower the vehicle, and press the Start button a few times to allow the pump to fill the fuel filter.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on the Peugeot Rifter
Replacing the Cabin Air Filter on the Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) On the air intake of the ventilation circuit of the Peugeot Rifter, a filter has been installed to prevent dirt and dust from entering the cabin. To …
How to replace the air filter on the Peugeot Rifter
How to replace the air filter on the Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) In this video, we see how to change the air filter of a Peugeot Rifter: the inlet is located on the top right side of the engine block. We will need …
Where is the spare wheel located on the Peugeot Rifter?
Where is the spare wheel located on the Peugeot Rifter?
Peugeot Rifter (2018-2026 / MK 1) The spare wheel on the Peugeot Rifter is located at the bottom of the vehicle's floor: to access it, open the rear tailgate to reach the loading area…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos