Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Eco Mode on the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

To disable Eco Mode on the Peugeot 308, there is no procedure that must be performed from the central display on the dashboard: you need to open the bonnet to access the engine compartment. Open the fuse box located next to the battery, near the left front headlamp.

Once opened, disconnect the connector at the top of the box and leave it disconnected for a few minutes. Reconnecting it after some time will ensure that the ECO mode has been disabled.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How do you deactivate the Eco Mode on the Peugeot 308?
How do you deactivate the Eco Mode on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To deactivate the ECO mode on the Peugeot 308, you will need to turn on the dashboard by turning the key inside the ignition switch: once the dashboa…
How to Disable the Start&Stop System on the Peugeot 308
How to Disable the Start&Stop System on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Below are the instructions regarding the operation of the Start&Stop system on the Peugeot 308, in simple and quick steps. First, get in the vehicle …
How to deactivate the Start&Stop system of the Peugeot 308
How to deactivate the Start&Stop system of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this guide we will see the information that will allow us to temporarily disable the Start&Stop system of the Peugeot 308. First of all, we get on…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos