Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the RAM 1500 automatic transmission oil

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Transmission fluid

Let's see in this video how to replace the RAM 1500 automatic gearbox oil, following the instructions below. First of all we lift the car and start by unscrewing and removing all the side screws of the transmission oil pan; then let the oil drain into a container. At this point we also remove and replace the oil filter; now reassemble the sump, after having replaced the gasket, and pour the new engine oil with a hose, unscrewing the filler cap. Now let's start the engine and check the smoothness of the gearbox.

Posted on 8 February 2022 by ScegliAuto

Video tutorial

Related tutorials

How to change the transmission oil of the Dodge RAM 1500
How to change the transmission oil of the Dodge RAM 1500
RAM 1500 (2002-2009 / D1, DC, DH, DR, DM, MK 3) In today's video tutorial we will see how to replace the rear differential transmission oil of the Dodge RAM 1500. First, let's move to the rear of t…
How to inspect the transmission fluid of a RAM 1500 with ZF 8HP70 transmission.
How to inspect the transmission fluid of a RAM 1500 with ZF 8HP70 transmission.
RAM 1500 (2019-2026 / MK 5, DT) In this video we can see how to inspect the transmission fluid of a RAM 1500 with a ZF 8HP70 gearbox: first of all, we need to bring the gearbox flui…
How to reset the oil service in the RAM 1500?
How to reset the oil service in the RAM 1500?
RAM 1500 (2009-2019 / DS, MK 4, DJ) Resetting the oil change light in the RAM 1500 pick-up is very simple, let's see how to proceed in this tutorial. Obviously, before following this pr…

Other guides you may be interested in

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos