Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the headlight of the Dodge Ram 3500?

Model: RAM 3500 DS, DJ, MK 4 - Years 2009-2019
Part: Headlight

In order to replace the front headlight of the Dodge Ram 3500 you must first remove the front grille located between the two headlights. To do this, you need to open the hood and detach the cover from the front of the engine compartment, so that you can unscrew the bolts that secure the grille in its upper part. Once this has been released, it will be necessary to remove the grille and loosen the screws underneath, which are in charge of fixing the headlight. The other screws that secure the headlight are located inside the wheel arch corresponding to the headlight; when this has been released, it can be removed from its housing and replaced with a new spare part.

Posted on 12 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight on the Dodge Ram 3500?
How to replace the headlight on the Dodge Ram 3500?
RAM 3500 (2003-2009 / DH, MK 3, D1, DR, DC, DM) In order to replace the headlight of the Dodge Ram 3500 you have to go and remove the grille located in the front of the car, between the two headlig…
How to replace the headlight bulb on the Dodge Ram 3500?
How to replace the headlight bulb on the Dodge Ram 3500?
RAM 3500 (2019-2026 / MK 5, DT) In order to replace the headlight bulb of the Dodge Ram 3500 you have to loosen the rivets that are located in the wheel arch corresponding to the bu…
How to replace Dodge RAM 3500 low beam and fog light bulbs
How to replace Dodge RAM 3500 low beam and fog light bulbs
RAM 3500 (2009-2019 / DS, DJ, MK 4) To change the headlight lights of the Dodge RAM 3500 we start by raising the bonnet, remove the 3 screws that hold the headlight (2 to the side and 1…

Other guides you may be interested in

How to Replace the Lift Supports on a Porsche 911

How to remove and replace the lift supports for the hood on a Porsche 911? Let's see how to replace them in this video: Lift the hood and secure it. Use a screwdriver or metal lever to detach the clips that hold the lift support at both ends (or unscrew the mounting pins). Install the new part onto the sheet metal of the front trunk, securing the lift support with the clips/pins. Proceed in the same manner for the removal/installation of the opposite lift support. Finally, test the gas springs installed earlier.

Watch the video!


by ScegliAuto

More videos