Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel airbag in the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Airbag

In this tutorial, we can see how to remove the steering wheel airbag in the Renault Clio, an extremely simple and quick operation. Before proceeding, open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbag itself. Start by going inside the car, then turn the steering wheel 90 degrees, locate the hole at the back and, using a long screwdriver, unlock the internal clip. Repeat the operation on the opposite side, separate the airbag from the steering wheel and disconnect the connector. To install the replacement, simply follow the reverse procedure.

Posted on 4 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag on a Renault Clio
How to Remove the Steering Wheel Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…
How to Remove the Airbag on a Renault Clio
How to Remove the Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the airbag from a Renault Clio? Follow this guide. Before removing the airbag in the vehicle, disconnect the battery power cables. Unsc…
How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How do you remove the airbag and steering wheel from a Renault Clio? Before removing the steering wheel, disconnect the battery terminals located in …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos