Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Airbag Light on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

Do you want to reset the airbag service light and don’t know how? Don’t worry. This video shows how to connect the mini computer to perform the reset on a Renault Megane.

First, open the car door and sit in the driver's seat. Under the dashboard (beneath the steering wheel), you will see a socket to connect your tester.

Connect the mini PC to the connector and perform a system check of the vehicle. After all necessary checks to identify any errors, reset the airbag light.

Finally, disconnect the mini PC cable from the previously connected socket.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

Removing the Steering Wheel Airbag from the Renault Megane
Removing the Steering Wheel Airbag from the Renault Megane
Renault Megane (2002-2010 / Megane 2) Let's see how to proceed with removing the airbag module from the steering wheel of the Renault Megane. Sit in the driver's seat; behind the central …
How to Disable the DF003 Error on the Renault Megane
How to Disable the DF003 Error on the Renault Megane
Renault Megane (1995-2003 / Megane 1) Below are the steps to reset the DF003 error on the Renault Megane, following the instructions provided. First, the error code is due to a fault with…
How to Change the Cabin Filter on the Renault Megane II
How to Change the Cabin Filter on the Renault Megane II
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, learn how to change the cabin air filter on the Renault Megane III: to change this filter, you need to remove part of the dashboard, s…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - What does the error code DF017 mean on the Renault Megane 2? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos