|
Do it yourself
| |||
| ||||
How to repair the heating fan wiring on the Renault Modus.
Model: Renault Modus
MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Let's see how to solve the problem of the fan not working on the Renault Modus. The reason is a burnt wiring, specifically a purple/lilac wire that causes the heating fan to malfunction (we can find the complete kit on Ali Express for the price of 17.33 euros, with free delivery in 4 days). We remove the glove compartment, which is secured by 3 screws (1 at the top right, 1 at the top left, and 1 at the bottom). We disassemble the console panels, disconnect the radio, gently lift the central console panel by placing our hands in the radio compartment, and at this point, we can identify the burnt wire; we run the new wire through the channels located behind the dashboard; the video shows the wiring running from the driver's side to the engine compartment. The new relay fits into a dedicated housing in the glove compartment and is secured with a screw. We reposition the glove compartment. We reassemble the central console and the radio.
Posted on 28 November 2025 by ScegliAuto
Related tutorials
Renault Modus
(2004-2013 /
MK 1)
How to dismantle the cabin ventilation fan on a Renault Modus? After removing the fabric trim under the glove compartment with a lever, unscrew the s…
Renault Modus
(2004-2013 /
MK 1)
Today's instructions will allow us to disassemble and replace the cabin fan of the Renault Modus. First, we get on board the cabin and start disassem…
Renault Modus
(2004-2013 /
MK 1)
In this video, you can see how to resolve the issue with a Renault Modus fan: in this case, the fan was not working, and to check the problem and acc…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
