Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Megane
  6. : How to replace engine oil on Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Engine oil
Operation: How to replace engine oil on Renault Megane

We replace the engine oil and the filter on a Renault Megane if we have done several km. We lift the car on a jack and unscrew the engine cover panel. We unscrew the pin of the oil pan; let the liquid flow into a container. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a strap wrench we unscrew the oil filter. We take out the worn oil filter from the engine compartment and place a new one. We top up the new liquid and close the front hood. We turn on and test the vehicle.


Posted on 4 December 2023 by ScegliAuto



How to replace engine oil and oil filter on a Renault Megane
Renault Megane (1995-2003 / Megane 1) Today in this video I will explain how to change the oil and the engine filter on our Renault Megane, it is not a very complex operation, it is enoug
Engine oil replacement on Renault Megane
Renault Megane (1995-2003 / Megane 1) Replacing the engine oil on a Renault Megane? Let's see the oil replacement. We lift the car on a pillar or jack bridge, unscrew the pin of the oil p
How to replace the oil and engine filter on a Renault Megane Scenic
Renault Megane (2002-2010 / Megane 2) I will show you How to change the oil and the engine filter on our Renault Megane Scenic, it is not a very complex operation, it is enough to have a

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos