Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Timing Belt on Renault Modus 1.5 dCi

Model: Renault Modus MK 1 - Years 2004-2013
Part: Timing belt

Let’s see how to remove the timing belt from the Renault Modus. Lift the car on a column lift and remove the undertray located under the vehicle, then disconnect the hose connected to the radiator using pliers. Remove the right wheel splash guard with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket to unscrew the tensioner pulley bolt, remove the water pump. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket. After installing the main components, fit all the covering parts.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on Renault Modus 1.5 dCi
Replacing the Timing Belt on Renault Modus 1.5 dCi
Renault Modus (2004-2013 / MK 1) Replace the timing belt on the Renault Modus. Remove the front right wheel after raising the vehicle on a jack. After removing the splash guard from …
How do you replace the timing belt on a Renault Modus?
How do you replace the timing belt on a Renault Modus?
Renault Modus (2004-2013 / MK 1) It will be possible to replace the timing belt of the Renault Modus by lifting the car with a jack or a lift, so that the front right wheel is not in…
How to replace the timing belt of the Renault Modus.
How to replace the timing belt of the Renault Modus.
Renault Modus (2004-2013 / MK 1) Replacing the timing belt on a Renault Modus is a task that can be done independently, thanks to our short video tutorial. To carry out the timing be…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos