Do it yourself
Frequently asked questions about cars and motorcycles

Check Starter Switch Functionality

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

If turning the key to the engine start position does not start the engine but the dashboard lights illuminate perfectly, you can rule out a battery issue. The cause may lie with the starter motor or the ignition switch behind the key barrel.

This is straightforward to check due to its accessibility and the verification method. Simply remove the two cover shells located under the steering column and intercept the connector between the switch and the electrical system.

At this point, use a tester or a test lamp to check for power on the various wires. Connect the earth of the test lamp and with the other probe, check for current on the connector wires first with the ignition off, then with the key in the on position, and finally ensure the lamp lights up when you turn the key to the start position.

If this is successful, it means the switch is functioning correctly.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Renault Megane (1995-2003 / Megane 1) If the starter motor does not activate when turning the ignition key and it is ruled out that the battery is flat, there is likely an issue with the …
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…
Renault Megane (2002-2010 / Megane 2) Before starting, open the bonnet of your Renault Laguna. Begin by dismantling and removing the hoses and collectors located above the starter motor, …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos