Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform Routine Maintenance on a Renault Clio 4?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

Routine maintenance is equivalent to a service or inspection. This task involves changing the engine oil and the oil, air, and pollen filters.

Start by replacing the engine oil, lifting the car on a ramp or axle stands. After removing the protection panel, unscrew the plug from the oil sump to drain the lubricant.

Meanwhile, replace the oil filter, then refit the plug, lower the car, and add the new oil. Now that the engine compartment is open, proceed to replace the air filter, and finally, focus on the pollen filter located inside the cabin.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In today's video, you will see how to reset the expired service message along with the corresponding light on the fourth series of the Renault Clio. …
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, see how to reset the service light on a Renault Clio, a very simple and quick operation to perform only after completing all requir…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos