Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel Airbag in a Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Airbag

In this tutorial, you will learn how to remove the steering wheel airbag in a Renault Clio, a very simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to avoid accidental activation of the system. Start by locating the hole in the central lower area of the steering wheel, then insert a flat-head screwdriver into it, lever towards the front of the car, and unlock the retaining clip. Once this is done, grasp the airbag, pull it towards you, and completely separate it from the steering wheel. Finally, disconnect the connector and fit the replacement if necessary.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag on a Renault Clio
How to Remove the Steering Wheel Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…
How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Follow the steps to dismantle and replace the steering wheel airbag on a Renault Clio, using the instructions below. First, open the bonnet of your c…
How to Remove the Steering Wheel Airbag from a Renault Clio
How to Remove the Steering Wheel Airbag from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How do you remove the airbag and steering wheel from a Renault Clio? Before removing the steering wheel, disconnect the battery terminals located in …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos