Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the Fuel Cut-off Switch on the Renault Master

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the fuel cut-off switch is located on the Renault Master. This device activates when the vehicle detects an unusual, sudden, or forced stop.

In the event of an accident or collision, the cut-off switch will deactivate the fuel pump to stop the flow and prevent fuel leaks from becoming a potential safety hazard. The switch usually comes with a reset button that will activate the fuel pump if the switch has been triggered.

It is located in front of the fuel filter and the brake servo.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to replace the fuel filter on the Renault Master 2
How to replace the fuel filter on the Renault Master 2
Renault Master (2010-2023 / MK 3) The worn fuel filter can prevent the vehicle from starting properly and signal a problem with the engine through the corresponding warning light. In …
Position and diagram of the internal fuses of the Renault Master
Position and diagram of the internal fuses of the Renault Master
Renault Master (2010-2023 / MK 3) Today's instructions will show us the positioning and layout of the internal fuse box of the Renault Master. First, we get on board the vehicle and s…
How to Replace the Diesel Filter in a Renault Master Van?
How to Replace the Diesel Filter in a Renault Master Van?
Renault Master (2010-2023 / MK 3) In this tutorial, you will see how to replace the diesel filter in the Renault Master van, a very simple and quick operation. First, ensure that the …

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos