Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spiral Contact in a Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Checks and maintenance

In this tutorial, you will learn how to replace the spiral contact in a Renault Clio, a very simple and quick operation, especially if the airbag light is on. First, ensure the key is not inserted, then disconnect the negative terminal of the battery. Rotate the steering wheel 180 degrees and locate the hole at the back. Next, insert a long screwdriver into this hole, release the airbag retaining clip, and separate it from the steering wheel. Finally, undo the large central bolt, detach the steering wheel from the steering column, and after unclip the cover, remove the spiral contact. To fit the replacement, simply follow the reverse procedure.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (1998-2005 / Clio 2, MK 2) In this video we see the PIN OUT, that is the arrangement and function of each individual contact (pin) present on an electrical connector. In this c…
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the rear wiper blade on a Renault Clio, lift the blade so that it is no longer in contact with the rear screen. Once lifted, position the …
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To replace the diesel filter of the Renault Clio, lift the car using a jack so that the front right wheel is off the ground: once the wheel is lifted…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos