Do it yourself
Frequently asked questions about cars and motorcycles

Dismantling Dashboard and Car Radio

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Car stereo

Using a plastic tool to avoid damaging the bodywork, lever at the sides of the air conditioning vent panel to disengage the plastic clips and remove it. Still using a plastic tool, lever at the sides of the console panel, then remove it to access the screws securing the radio. Unscrew the screws from the radio fascia to completely slide the car radio out of its housing. Carefully remove the car radio by lifting it to allow disconnection of the connectors at the back. Install the new car radio by reversing the steps.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…
Saab 9 3 (2002-2014 / MK 2) Installing a car stereo is a straightforward task that you can do independently. Before starting, disconnect the battery cables. Then, remove all the…
Saab 9 3 (2002-2014 / MK 2) Using a plastic spatula, detach the climate control console and disconnect the connector by first removing the locking clip. With the aid of two plas…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos