Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Diesel fuel filter

Video tutorial

Learn how to replace the fuel filter on a 2020 Seat Ateca. Open the bonnet and place rags around the filter inlet, then remove the 5 T25 Torx screws from the cover.

Gently pry off the cover with a flat screwdriver, then siphon out the dirty fuel with a syringe and dispose of it in a container; you will dispose of it along with the filter at an authorised centre. Remove the old filter and let any residual fuel drain out. If there is dirt at the bottom, dry and clean the inlet thoroughly using lint-free paper.

Fit the new filter (which you can find at auto-doc.it with EAN code 2230140122900 for £25.49 + £9.95 shipping) by positioning and reinserting the cover, securing it in the centre. Tighten the 5 screws.

Now we need to connect to the VDCS: go to "select module"/"01 engine"/"04 basic settings". Look for the IDE00459 fuel pump control/pump supply, and start the procedure with the "go" button. Listen to the pump: when the sound changes (no more air bubbles), stop it. Check for leaks and ensure all rags are removed from the engine.


Posted on 25 February 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Seat Ateca
How to replace the cabin air filter of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) If you want to replace the air filter inside the cabin of your Seat Ateca by yourself, just carefully read the procedure described in our new guide a…
Replacing the cabin air filter of the Seat Ateca
Replacing the cabin air filter of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) Today, we will see the step-by-step instructions for removing and replacing the cabin air filter of the Seat Ateca. First, open the front door of the…
Replacing the Cabin Filter on the Seat Ateca
Replacing the Cabin Filter on the Seat Ateca
Seat Ateca (2016-2025 / MK 1) This brief guide explains how to replace the cabin or pollen filter in your Seat Ateca. First, open the passenger side dashboard of your car. Using a…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos