Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil

Model: Skoda Octavia 1U, MK 1 - Years 1996-2004
Part: Engine oil

The first step to change your engine oil is to remove the cover above the engine. You can remove this component by locating and removing the two caps that provide access to the bolts holding the cover: unscrew them and the cover will come off. At the bottom of the engine block, you will find the oil level check cap, which can be checked by inserting a dipstick and seeing how far it has become dirty. Next to this, there will be another cap: unscrewing it will release the oil filter, a crucial component for the proper functioning of the engine. At the bottom of the opening created resides the oil reservoir. Use a suction pump, which works like a syringe, to drain it. Now you are ready for the oil change: after (if necessary) reinserting a new oil filter, fill the canister that has its opening on the top of the engine block. Use a funnel and be careful not to spill on other components. You're done.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Octavia (1996-2004 / 1U, MK 1) In this guide, lift your car on a column lift or jack and use a socket spanner to unscrew the oil filter from the engine block. Ensure the plug is se…
Skoda Octavia (2012-2019 / MK 3, 5E) Let's see how to change the oil and filter on a Skoda Octavia: we open the oil cap inside the hood; this will help us drain the oil more quickly. We …
Skoda Octavia (1996-2004 / 1U, MK 1) To facilitate access to the oil sump, it is recommended to first lift the vehicle on a hydraulic lift or suitable car ramps; the drain plug for the u…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos