Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Skoda Octavia 1U, MK 1 - Years 1996-2004
Part: Oil filter

To facilitate access to the oil sump, it is recommended to first lift the vehicle on a hydraulic lift or suitable car ramps; the drain plug for the used oil is located at the rear of the sump: remove the lower cover, then position a container to collect the oil, unscrew the plug, and re-screw it after draining is complete. The oil filter is a cartridge type and is located at the top of the engine, near the throttle body: remove the cover on top of the engine block, locate the plastic nut of the filter housing cap and unscrew it, extract the old filter and apply the new one, also replacing the O-ring seals. Finally, fill the engine with new oil.

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Engine Oil and Filter Replacement
Skoda Octavia (1996-2004 / 1U, MK 1) During an oil change, it is advisable to also check the condition of the engine air filter and perhaps clean or replace it: unscrew the fixing screws…
How to Replace Oil Filter on Skoda Octavia
How to Replace Oil Filter on Skoda Octavia
Skoda Octavia (1996-2004 / 1U, MK 1) Replacing the oil filter on a Skoda Octavia? Let's look at the disassembly. Position your car on a column lift and raise it to a comfortable height f…
How to Change the Engine Oil Filter on a Skoda Octavia
How to Change the Engine Oil Filter on a Skoda Octavia
Skoda Octavia (1996-2004 / 1U, MK 1) In this guide, lift your car on a column lift or jack and use a socket spanner to unscrew the oil filter from the engine block. Ensure the plug is se…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos