Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Door Panel on a Toyota Rav 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

How to remove the door panel on a Toyota Rav 4? Follow these steps for disassembly. Before starting, disconnect the battery terminals located in the boot.

Start by using a trim removal tool to detach the plastic at the corner of the window (if present), then remove the cover of the handle/door release lever on the panel. Use a screwdriver to unscrew the fastening screws located in the plastic handle.

Once all screws are removed, use the trim tool to unclip the window switch panel and all plastic clips securing the door. Remove the door panel by hand, disconnect any power connectors and release cable.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Remove the External Door Handle of the Toyota RAV 4
How to Remove the External Door Handle of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open …
How to Repair the Door Lock on a Toyota RAV 4
How to Repair the Door Lock on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide outlines the steps to dismantle and repair the door lock on a Toyota RAV 4. First, open the front door and start removing the door panel b…
Removing the Left Rear Door Panel on a Toyota Rav 4
Removing the Left Rear Door Panel on a Toyota Rav 4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Remove the battery terminals located in the engine bay. Remove the trim near the opening lever; using a screwdriver, unscrew the screws inside the ha…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos