Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset of the tire pressure warning light for the Toyota Auris.

Model: Toyota Auris E180 - Years 2012-2018
Part:

We will briefly see the instructions that will allow us to reset the TPMS warning light on the Toyota Auris. Before resetting the warning on the instrument panel display, it is necessary for all four tires to be at the correct operating pressure. So, let's get inside the vehicle and start by turning on the instrument panel. Then, we open the glove compartment and press and hold the TPMS reset button located inside until the warning on the instrument panel display is correctly reset. This way, we will have successfully reset the tire pressure warning!

Posted on 21 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on a Toyota Auris?
How do you reset the tire pressure warning light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tire pressure warning light on the Toyota Auris, turn on the instrument panel after all tires have been brought to the correct pressure …
How to reset the tire pressure warning light on Toyota Auris
How to reset the tire pressure warning light on Toyota Auris
Toyota Auris (2012-2018 / E180) In this guide, let's see how to reset the Toyota Auris tire pressure warning light (TPMS); before performing the reset, all four tires must be at ope…
How do you reset the tire pressure warning light on the Toyota Auris?
How do you reset the tire pressure warning light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) The procedure to reset the tire pressure warning light on the Toyota Auris is done by inflating the tires to the recommended pressure value: this is …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos