Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagramma dei fusibili di una Toyota Corolla

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

In today's video, we will look at all the diagrams of the two fuse boxes found in a Toyota Corolla, third-generation model produced from 2009 to 2013. The video accurately displays all the diagrams for each individual fuse and relay, indicating their function, position, and operating amperage.

Additionally, the locations of the two fuse boxes are shown.

The first box is located in the engine compartment on the driver's side, to the right of the filter box, while the second is positioned under the dashboard inside the cabin, at the bottom left relative to the steering wheel.


Posted on 5 January 2026 by ScegliAuto


Related tutorials

Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the diagram and layout of the fuses for the Toyota Corolla 1.8 Hybrid, following the instructions provided. First, open the bonnet and loca…
Fuse Diagram and Placement for the Toyota Corolla
Fuse Diagram and Placement for the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide provides information on the diagram and placement of the fuse boxes for the Toyota Corolla. First, open the vehicle's bonnet and start rem…
Fuse Diagram and Layout for the Toyota Corolla
Fuse Diagram and Layout for the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) This guide will show you how to access the fuse boxes on the Toyota Corolla, as well as the Auris. First, open the driver's side front door and start…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos