Do it yourself
| ||||
|
Toyota Corolla - Video tutorial
Model: Toyota Corolla
MK 2
- Years 2000-2007 In this tutorial we can see how to disassemble the rear light of the Toyota Corolla and replace the bulbs. For this simple and quick operation we will only need a 10mm socket wrench. First of all, let's make sure that the key is not inserted, then open the luggage compartment and move the carpet to the side where we are going to work. Next, we unscrew the three nuts with the 10mm wrench, disconnect the two connectors and extract the headlight from the body. We rotate the lamp holder anticlockwise to extract it from its seat, and follow the reverse procedure to reassemble everything.
Posted on 14 April 2024 by ScegliAuto
How to replace the brake light bulbs in a Toyota Corolla.
Toyota Corolla (2006-2013 / MK 3) In today's video, we will see how to replace the rear stop light bulbs in the Toyota Corolla. First, we need to get a replacement bulb, following the
How to replace the rear light bulbs in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) Replacing the rear light bulbs in the Toyota Corolla is a very simple operation, let's see how to proceed in this tutorial. First we remove the plast
How to replace brake light bulbs in Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) In this tutorial we can see how to replace the brake light bulbs in the Toyota Corolla, a very simple and fast operation. First of all, make sure tha Other guides that may interest you
|
How to reset the Renault Master AdBlue warning lightIf when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |