Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : Where is the fuel filter in Toyota RAV4 and how to replace it?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: Diesel filter
Operation: Where is the fuel filter in Toyota RAV4 and how to replace it?

In this video we can see where the fuel filter is in the Toyota RAV4 and how to proceed in case we need to replace it. As shown, it is located inside the engine compartment, located in front of the windshield on the left side. To disassemble it, we will first have to remove the battery and the air filter box, after which we can unscrew the fixing bolts of the relative bracket with a 10mm wrench, disconnect both the fuel pipes and the sensor connector. To fit the spare, it will be sufficient to follow the reverse procedure.


Posted on 31 August 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Rav 4 2019-2026 - What problems with the fuel filter of the Toyota Rav4? Read Answer
    • Rav 4 2006-2013 - Where is the Toyota RAV 4 diesel filter located? Read Answer
    • Rav 4 2006-2013 - Where is the Toyota RAV 4 diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos