Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Know the Fuse Diagrams for a Toyota Yaris Hybrid

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

The first fuse box of a Toyota Yaris Hybrid can be found inside the vehicle's cabin, located low on the left under the steering column; this box contains fuses assigned to: side lights, instrument cluster, window lifters, demister, ECU, braking system, audio system, electric steering lock, air conditioning, windscreen wipers, washer, rain sensor, central locking, fog lights, stop lights, onboard diagnostic system, heated seats, etc. In the engine compartment, there are two fuse boxes: the first is on the far left and contains: injector pump, horn, main beam, dipped beam, SRS airbag system, start and stop system, battery, hybrid system, etc. The second fuse box is on the far right of the engine compartment and contains: hybrid system, braking system, air conditioning system, etc.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2020 Toyota Yaris Hybrid
How to Reset the Service Light on the 2020 Toyota Yaris Hybrid
Toyota Yaris (2020-2026 / MK 4) The service light, illuminated and shaped like a spanner, can be found on the instrument panel of all vehicles, including the 2020 Toyota Yaris Hybri…
How to Start a Toyota Yaris Hybrid with a Flat Battery
How to Start a Toyota Yaris Hybrid with a Flat Battery
Toyota Yaris (2020-2026 / MK 4) Starting a Toyota Yaris Hybrid with a flat battery is simple, but different from a traditional car. You do not need to look for the 12-volt battery u…
How to Set the Time on the Toyota Yaris Hybrid
How to Set the Time on the Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) This guide provides instructions to adjust the clock on the Toyota Yaris Hybrid, following these simple steps. First, get inside the vehicle and turn…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos